ARIKON Plug-in Gas Alarm Detector with Talking Alarm, Digital Display and 9V Battery Back Up

ARIKON Plug-in Gas Alarm Detector with Talking Alarm, Digital Display and 9V Battery Back Up

ARIKON Plug-in Gas Alarm Detector with Talking Alarm, Digital Display and 9V Battery Back Up

  • 1.The product is a smart combustible gas detector with voice prompt, microprocessor control, support displaying of the gas concentration. When trigger the gas detector, it will alarm with build-in siren. This detector adopt catalytic combustion method sensor which is stable and reliable. It keeps the place safe from the threats of combustible gas (such as liquefied petroleum gas, natural gas, methane, etc.)
  • 2.Human voice prompt and high reliable catalytic combustion method
  • 3.High Reliable Catalytic Combustion Method and Gas Concentration Displaying (PPM)
  • 4.Intelligent microprocessor control and auto low battery warning
  • 5.Alarm memory function and auto detect sensor failure


Description

Technical Parameter
1.AV voltage:AV 9V-240V 50-60Hz
2.Battery voltage:9V rechargeable battery(optional)
3.Working temperature:0-50?
4.Environment Humility:10%-95%
5.Alarm Density:2500PPM(±1500PPM)
6.Alarm time: keep alarming after over 2500PPM
7.Size:Approx112x73x42MM

Notice
1.The gas detector is easy to be effected by the sharp pounding and shock in transit or installation, lead to not work
2.This is a Combustible Gas Detector, can not detect the poisonous gas such as CO.
3.Scheduled maintenance: surface cleaning per month, specialist inspection per half year.
4.Do not use the detergent to clean the gas detector, this will damage the gas detector.
5.Do not spray any sprays such as air freshener, hair spray, etc.
6.This product is only used to reduce the accident, cannot make sure every time. Except use our detector in right way, pleasure pay more attention in your daily life and strengthen safety and security consciousness

How to test
Plug into 90V-240V power and wait 3 minutes.
press the test button, then the detector will siren and the LCD display will show ” tESt”
Turn on your gas knob, when PPM goes above 1000, the LCD display comes on with the PPM shown in bright, clearly visible red LED numbers; when PPM passes 2500, the alarm sounds with a voice

How to reset
press the test button and plug the gas detector into AC power. After 3 seconds, pull out the detector and release the test button. Plug the detector into AC power again without pressing test button. Wait 3 minutes, then you will see 555 in the LCD Display.It means the detector has been reset successfully.
Pull out the detector and plug again, it will count down 3 minutes, you will hear the voice prompt, it works fine.

We have passed the CE & ROHS Certification and EN50291



List Price: $ 26.69

Price: